HIGHSIDER CNC push button CLASSIC black 78 and 1 inch handlebars

HIGHSIDER CNC push button CLASSIC, Suitable for 7/8 and 1 inch handlebars

CNC milled switch with two push buttons. Universally applicable for controlling load relays, switching various modes on tachos, etc.

connections:
Button A : green and red (from bottom)
Button B : green and brown Green is input signal

Dimensions:
Width: xx mm
Depth: xx mm
Button Ø: 4,5 mm
Rubber: 75 mm x 0,3 mm
Anbus screws: M3x 5 mm
Cable length 570 mm

Scope of supply:
1x Button
1x Rubber
2x Screws

Note: NOT for currents above 0.05 amps. So at 12 Volt max. 0.6 Watt.